How to Flash Stock Rom
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool
First of all, make sure you have MediaTek DA USB VCOM drivers installed.
Open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
After the red progress bar is complete, there will appear a purple progress bar.
Right after the purple progress bar is complete, a message will appear underneath it:
“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.
You can now safely disconnect your phone and turn it on. The process ends here.